Discount Fieldpiece Manual Ranging Clamp Meter with Temperature to 1000 F - SC67 Shop

before decision to buy, I searches on online so long time. So I gathered a online shop that sells Fieldpiece Manual Ranging Clamp Meter with Temperature to 1000 F - SC67 and compare prices to. Some online stores offers me fast shipping.

Fieldpiece Manual Ranging Clamp Meter with Temperature to 1000 F - SC67 Features

• Non-contact Voltage -- With the NCV tab on the tip of the clamp close to an AC voltage, press and hold the NCV button. The NCV LED will light with an analog feel and the beeper will beep. The closer you get to AC voltage, the louder the beep. The NCV function is sensitive enough to detect 24VAC on thermostats (24V to 600V, 50Hz to 60Hz).
• High Voltage and Continuity Indicators -- If you were doing lab testing, these features would probably drive you crazy. We've heard from more than one HVAC/R veteran that these features really remind you of what you're doing and they've avoided potentially dangerous situations in the field. The Hi-V LED and beeper let you know when you've hooked up to a circuit over 30V. The continuity LED and beeper tells you if a circuit is open or closed.
• 200AAC -- Using the built-in amp clamp, read 0-200 amps directly on your meter with 0.1 resolution.
• Capacitance (MFD) -- Measure microfarads on motor-run and motor-start capacitors using this range. Disconnect the capacitor from power first. Short the terminals to discharge the capacitor. Disconnect any resistors that might be between the terminals of the capacitor and measure to check for degradation.
• Microamps DC - Flame Rectification Tests -- The most common 'no heat" call has to do with a malfunctioning flame sensing diode. Simply turn the meter to microamps DC, hook up, and see if the flame sensing rod is functioning properly.

Fieldpiece Manual Ranging Clamp Meter with Temperature to 1000 F - SC67 Overview

• Non-contact Voltage -- With the NCV tab on the tip of the clamp close to an AC voltage, press and hold the NCV button. The NCV LED will light with an analog feel and the beeper will beep. The closer you get to AC voltage, the louder the beep. The NCV function is sensitive enough to detect 24VAC on thermostats (24V to 600V, 50Hz to 60Hz).
• High Voltage and Continuity Indicators -- If you were doing lab testing, these features would probably drive you crazy. We've heard from more than one HVAC/R veteran that these features really remind you of what you're doing and they've avoided potentially dangerous situations in the field. The Hi-V LED and beeper let you know when you've hooked up to a circuit over 30V. The continuity LED and beeper tells you if a circuit is open or closed.
• 200AAC -- Using the built-in amp clamp, read 0-200 amps directly on your meter with 0.1 resolution.
• Capacitance (MFD) -- Measure microfarads on motor-run and motor-start capacitors using this range. Disconnect the capacitor from power first. Short the terminals to discharge the capacitor. Disconnect any resistors that might be between the terminals of the capacitor and measure to check for degradation.
• Microamps DC - Flame Rectification Tests -- The most common 'no heat" call has to do with a malfunctioning flame sensing diode. Simply turn the meter to microamps DC, hook up, and see if the flame sensing rod is functioning properly.